Number of Products: 32753

e-mail: info@fk-automotive.de

phone: +49-(0) 71 91-32 75 0

Mon-Fri: 9: 00-12: 00, 13:00-16:00

phone: +49-(0) 71 91-32 75 0Mon-Fri: 9: 00-12: 00, 13:00-16:00

  • Dealers
  • account
  • Delivery country DE
Number of Products: 32753
Basket 0 0,00 €
Professional Tuning and Carparts
< Back
Wheel spacer system A 30 mm per wheel Toyota Celica (TA4 / RA4)

Wheel spacer system A 30 mm per wheel Toyota Celica (TA4 / RA4)

FK-Automotive
Item No.: FK16530Z-01
  • for Toyota Celica (TA4 / RA4)
  • for year of construction: 1978 to 1982
  • Width / axis 60 mm
  • Track widening system A with center.
  • Hole circle 4 / 114.3 Hub hole 60.1 M12x1.5
  • Fixing screws not included
  • Best quality
to the detailed description

The wheel spacers are attached to the original vehicle mount using longer wheel bolts. The assembly is very easy. Simply put the wheel down, put the track widening on it and then mount the rim on the wheel hub using longer wheel bolts. The wheel spacers are produced on the most modern CNC-controlled saws, turning and milling centers. Please order longer wheel bolts at the same time! FK offers 4 different types of wheel spacers

System A without centering , this track widening is a kind of disk on which the hole pattern of your vehicle is integrated. The hub diameter is also taken into account. With this type of vehicle, it is important that the series hub has a longer centering than the track widening so that the rim is also centered over the series scar. If the serial scar does not center the rim, the rim must be centered using the wheel bolts / wheel bolts. This means that the screws in the unloaded vehicle are tightened to the nominal torque! Fixing screws not included in delivery.

System A with centering , this track widening has a centering over which the rims are then centered. Therefore a rotation is also granted at high speeds. Before you install or order a wheel spacer without centering, always prefer a wheel spacer with centering if technically possible. However, note the standard height of the hub. Fixing screws not included in delivery.

System B with centering , in this system the wheel spacer is attached directly to the wheel hub with the short head screws supplied. Then the rim is attached to the wheel spacer using the original rim bolts. It is important that you are fastened a maximum of 5-7 screw turns in the wheel spacer! This has to be checked before mounting to the rims with the wheel spacers.

System B + with centering , in this system the wheel spacer is attached directly to the wheel hub with the short head screws supplied. Then the rim is attached to the wheel spacer using the original rim bolts. The screw fastening is guaranteed 100% by pressed steel beeches! It is important that you are fastened a maximum of 5-7 screw turns in the wheel spacer! This has to be checked before mounting to the rims with the wheel spacers.

Further execution details:

  • Material consisting of high-strength aluminum which is also used in aircraft construction.

  • Race tracks and strength tested and proven by TÜV.

  • Vehicle-specific wheel spacers and no universal wheel spacers

  • Details of the width always per axle, i.e. the pulley thickness multiplied by two

  • easy assembly within minutes great effect

  • if the track widening is with approval, the TÜV certificate is supplied

  • Quantity always two slices per set

  • front and rear axles of different widths can be mounted

  • Plan parallelism difference less than 0.1mm

Scope of delivery:

  • 1 set of wheel spacers (left + right for two rims)

Immediately available Immediately available
Delivery time: 2-4 days
Weight: 4 kg
just 79,90 € incl. 19% VAT, plus
amount
Wheel spacer system A 30 mm per wheel Toyota Celica (TA4 / RA4)

specification

  • Vehicle manufacturer Toyota
  • Vehicle model Carina (TA4L, TA6_L) | Carina Kombi (_A6_) | Celica Coupe (RA4_, TA4_) | Celica (_A4_) | Celica (TA60, RA40, RA6_) | Carina Station Wagon (TA4K, TA6K)
  • system System A
  • centering with centering
  • Width per axis 60 mm
  • Bolt circle LK 4 / 114.3
  • Width per wheel 30 mm
  • Article group Track widening

Item Description

The wheel spacers are attached to the original vehicle mount using longer wheel bolts. The assembly is very easy. Simply put the wheel down, put the track widening on it and then mount the rim on the wheel hub using longer wheel bolts. The wheel spacers are produced on the most modern CNC-controlled saws, turning and milling centers. Please order longer wheel bolts at the same time! FK offers 4 different types of wheel spacers

System A without centering , this track widening is a kind of disk on which the hole pattern of your vehicle is integrated. The hub diameter is also taken into account. With this type of vehicle, it is important that the series hub has a longer centering than the track widening so that the rim is also centered over the series scar. If the serial scar does not center the rim, the rim must be centered using the wheel bolts / wheel bolts. This means that the screws in the unloaded vehicle are tightened to the nominal torque! Fixing screws not included in delivery.

System A with centering , this track widening has a centering over which the rims are then centered. Therefore a rotation is also granted at high speeds. Before you install or order a wheel spacer without centering, always prefer a wheel spacer with centering if technically possible. However, note the standard height of the hub. Fixing screws not included in delivery.

System B with centering , in this system the wheel spacer is attached directly to the wheel hub with the short head screws supplied. Then the rim is attached to the wheel spacer using the original rim bolts. It is important that you are fastened a maximum of 5-7 screw turns in the wheel spacer! This has to be checked before mounting to the rims with the wheel spacers.

System B + with centering , in this system the wheel spacer is attached directly to the wheel hub with the short head screws supplied. Then the rim is attached to the wheel spacer using the original rim bolts. The screw fastening is guaranteed 100% by pressed steel beeches! It is important that you are fastened a maximum of 5-7 screw turns in the wheel spacer! This has to be checked before mounting to the rims with the wheel spacers.

Further execution details:

  • Material consisting of high-strength aluminum which is also used in aircraft construction.

  • Race tracks and strength tested and proven by TÜV.

  • Vehicle-specific wheel spacers and no universal wheel spacers

  • Details of the width always per axle, i.e. the pulley thickness multiplied by two

  • easy assembly within minutes great effect

  • if the track widening is with approval, the TÜV certificate is supplied

  • Quantity always two slices per set

  • front and rear axles of different widths can be mounted

  • Plan parallelism difference less than 0.1mm

Scope of delivery:

  • 1 set of wheel spacers (left + right for two rims)

Vehicle data

To confirm this part will fit your vehicle, please enter vehicle details below.
Or look for
HSN
TSN
HSN TSN Manufacturer Vehicle model Vehicle type platform engine Construction year
7104 334 TOYOTA Carina 1.6 TA4, TA6 1577 ccm, 55 kW, 74 PS 1978/01-1983/09
7104 335 TOYOTA Carina Kombi 1.6 A6 1577 ccm, 55 kW, 74 PS 1981/08-1983/09
7104 336 TOYOTA Celica Coupe 1.6 LT RA4, TA4 1577 ccm, 55 kW, 74 PS 1979/02-1981/07
7104 337 TOYOTA Celica Coupe 1.6 ST RA4, TA4 1577 ccm, 66 kW, 89 PS 1979/02-1981/07
7104 338 TOYOTA Celica 1.6 ST A4 1577 ccm, 66 kW, 89 PS 1979/02-1981/07
7104 339 TOYOTA Celica Coupe 1.6 GT RA4, TA4 1577 ccm, 80 kW, 108 PS 1978/04-1981/07
7104 340 TOYOTA Celica 2.0 GT A4 1954 ccm, 90 kW, 122 PS 1977/08-1981/07
7104 342 TOYOTA Celica 2.0 XT RA40, RA6, TA60 1954 ccm, 66 kW, 89 PS 1979/02-1981/07
7104 357 TOYOTA Celica Coupe 1.6 ST A4 1577 ccm, 63 kW, 85 PS 1977/08-1981/07
7104 358 TOYOTA Celica 1.6 ST A4 1577 ccm, 63 kW, 85 PS 1977/08-1981/07
7104 359 TOYOTA Celica Coupe 1.6 GT RA4, TA4 1577 ccm, 81 kW, 110 PS 1980/04-1981/07
7104 360 TOYOTA Celica 2.0 XT RA40, RA6, TA60 1954 ccm, 65 kW, 88 PS 1980/01-1981/07
7104 362 TOYOTA Carina Kombi 1.6 TA4K, TA6K 1577 ccm, 54 kW, 73 PS 1981/03-1982/01

media

reviews

You have to be logged in to write a review.
There are no reviews for this product.
Do you have questions about this product? eMailUs Contact us by E-MAIL Print PRINT all details for this product