Number of Products: 32753

e-mail: info@fk-automotive.de

phone: +49-(0) 71 91-32 75 0

Mon-Fri: 9: 00-12: 00, 13:00-16:00

phone: +49-(0) 71 91-32 75 0Mon-Fri: 9: 00-12: 00, 13:00-16:00

  • Dealers
  • account
  • Delivery country DE
Number of Products: 32753
Basket 0 0,00 €
Professional Tuning and Carparts
< Back
Track widening spacer system A 15 mm per wheel Skoda Octavia 3 (5E)

Track widening spacer system A 15 mm per wheel Skoda Octavia 3 (5E)

FK-Automotive
Item No.: FK01315Z-29
  • for Skoda Rapid (NH)
  • Width / axis 30 mm
  • Track widening system A with center.
  • Pitch circle 5/100 hub hole 57.1 M14x1.5
  • Fixing screws not included
  • Best quality
to the detailed description

The wheel spacers are attached to the original vehicle mount using longer wheel bolts. The assembly is very easy. Simply put the wheel down, put the track widening on it and then mount the rim on the wheel hub using longer wheel bolts. The wheel spacers are produced on the most modern CNC-controlled saws, turning and milling centers. Please order longer wheel bolts at the same time! FK offers 4 different types of wheel spacers

System A without centering , this track widening is a kind of disk on which the hole pattern of your vehicle is integrated. The hub diameter is also taken into account. With this type of vehicle, it is important that the series hub has a longer centering than the track widening so that the rim is also centered over the series scar. If the serial scar does not center the rim, the rim must be centered using the wheel bolts / wheel bolts. This means that the screws in the unloaded vehicle are tightened to the nominal torque! Fixing screws not included in delivery.

System A with centering , this track widening has a centering over which the rims are then centered. Therefore a rotation is also granted at high speeds. Before you install or order a wheel spacer without centering, always prefer a wheel spacer with centering if technically possible. However, note the standard height of the hub. Fixing screws not included in delivery.

System B with centering , in this system the wheel spacer is attached directly to the wheel hub with the short head screws supplied. Then the rim is attached to the wheel spacer using the original rim bolts. It is important that you are fastened a maximum of 5-7 screw turns in the wheel spacer! This has to be checked before mounting to the rims with the wheel spacers.

System B + with centering , in this system the wheel spacer is attached directly to the wheel hub with the short head screws supplied. Then the rim is attached to the wheel spacer using the original rim bolts. The screw fastening is guaranteed 100% by pressed steel beeches! It is important that you are fastened a maximum of 5-7 screw turns in the wheel spacer! This has to be checked before mounting to the rims with the wheel spacers.

Further execution details:

  • Material consisting of high-strength aluminum which is also used in aircraft construction.

  • Race tracks and strength tested and proven by TÜV.

  • Vehicle-specific wheel spacers and no universal wheel spacers

  • Details of the width always per axle, i.e. the pulley thickness multiplied by two

  • easy assembly within minutes great effect

  • if the track widening is with approval, the TÜV certificate is supplied

  • Quantity always two slices per set

  • front and rear axles of different widths can be mounted

  • Plan parallelism difference less than 0.1mm

Scope of delivery:

  • 1 set of wheel spacers (left + right for two rims)

Immediately available Immediately available
Delivery time: 2-4 days
Weight: 1.5 kg
just 59,90 € incl. 19% VAT, plus
amount
Track widening spacer system A 15 mm per wheel Skoda Octavia 3 (5E)

specification

  • Width per wheel 15 mm
  • Vehicle manufacturer Skoda
  • Vehicle model Octavia III (5E3) | Octavia III Combi (5E5)
  • Admission without approval
  • system System A
  • centering with centering
  • Width per axis 30 mm
  • Bolt circle LK 5/100
  • Article group Track widening

Item Description

The wheel spacers are attached to the original vehicle mount using longer wheel bolts. The assembly is very easy. Simply put the wheel down, put the track widening on it and then mount the rim on the wheel hub using longer wheel bolts. The wheel spacers are produced on the most modern CNC-controlled saws, turning and milling centers. Please order longer wheel bolts at the same time! FK offers 4 different types of wheel spacers

System A without centering , this track widening is a kind of disk on which the hole pattern of your vehicle is integrated. The hub diameter is also taken into account. With this type of vehicle, it is important that the series hub has a longer centering than the track widening so that the rim is also centered over the series scar. If the serial scar does not center the rim, the rim must be centered using the wheel bolts / wheel bolts. This means that the screws in the unloaded vehicle are tightened to the nominal torque! Fixing screws not included in delivery.

System A with centering , this track widening has a centering over which the rims are then centered. Therefore a rotation is also granted at high speeds. Before you install or order a wheel spacer without centering, always prefer a wheel spacer with centering if technically possible. However, note the standard height of the hub. Fixing screws not included in delivery.

System B with centering , in this system the wheel spacer is attached directly to the wheel hub with the short head screws supplied. Then the rim is attached to the wheel spacer using the original rim bolts. It is important that you are fastened a maximum of 5-7 screw turns in the wheel spacer! This has to be checked before mounting to the rims with the wheel spacers.

System B + with centering , in this system the wheel spacer is attached directly to the wheel hub with the short head screws supplied. Then the rim is attached to the wheel spacer using the original rim bolts. The screw fastening is guaranteed 100% by pressed steel beeches! It is important that you are fastened a maximum of 5-7 screw turns in the wheel spacer! This has to be checked before mounting to the rims with the wheel spacers.

Further execution details:

  • Material consisting of high-strength aluminum which is also used in aircraft construction.

  • Race tracks and strength tested and proven by TÜV.

  • Vehicle-specific wheel spacers and no universal wheel spacers

  • Details of the width always per axle, i.e. the pulley thickness multiplied by two

  • easy assembly within minutes great effect

  • if the track widening is with approval, the TÜV certificate is supplied

  • Quantity always two slices per set

  • front and rear axles of different widths can be mounted

  • Plan parallelism difference less than 0.1mm

Scope of delivery:

  • 1 set of wheel spacers (left + right for two rims)

Vehicle data

To confirm this part will fit your vehicle, please enter vehicle details below.
Or look for
HSN
TSN
HSN TSN Manufacturer Vehicle model Vehicle type platform engine Construction year
8004 ANC SKODA Octavia III 1.2 TSI 5000, NL3, NR3 1197 ccm, 63 kW, 85 PS 2012/11-2017/02
8004 AND SKODA Octavia III 1.4 TSI 5000, NL3, NR3 1395 ccm, 103 kW, 140 PS 2012/11-2017/02
8004 ANE SKODA Octavia III 1.8 TSI 5000, NL3, NR3 1798 ccm, 132 kW, 179 PS 2012/11-2020/10
8004 ANF SKODA Octavia III 1.6 TDi 5000, NL3, NR3 1598 ccm, 77 kW, 104 PS 2012/11-2015/05
8004 ANG SKODA Octavia III 2.0 TDi 5000, NL3, NR3 1968 ccm, 110 kW, 149 PS 2012/11-2020/10
8004 ANH SKODA Octavia III Combi 1.2 TSI 500000, 5000000 1197 ccm, 63 kW, 85 PS 2012/11-2017/02
8004 ANI SKODA Octavia III Combi 1.4 TSI 500000, 5000000 1395 ccm, 103 kW, 140 PS 2012/11-2017/02
8004 ANJ SKODA Octavia III Combi 1.8 TSI 500000, 5000000 1798 ccm, 132 kW, 179 PS 2012/11-2020/10
8004 ANK SKODA Octavia III Combi 1.6 TDi 500000, 5000000 1598 ccm, 77 kW, 104 PS 2012/11-2015/05
8004 ANL SKODA Octavia III Combi 2.0 TDi 500000, 5000000 1968 ccm, 110 kW, 149 PS 2012/11-2020/10
8004 ANM SKODA Octavia III 1.2 TSI 5000, NL3, NR3 1197 ccm, 77 kW, 104 PS 2012/11-2017/02
8004 ANN SKODA Octavia III Combi 1.2 TSI 500000, 5000000 1197 ccm, 77 kW, 104 PS 2012/11-2017/02
8004 ANO SKODA Octavia III 1.6 TDi 5000, NL3, NR3 1598 ccm, 66 kW, 89 PS 2012/11-2020/10
8004 ANP SKODA Octavia III Combi 1.8 TSI 4x4 500000, 5000000 1798 ccm, 132 kW, 179 PS 2012/11-2017/02
8004 ANQ SKODA Octavia III Combi 2.0 TDi 4x4 500000, 5000000 1968 ccm, 110 kW, 149 PS 2012/11-2020/10
8004 ANR SKODA Octavia III Combi 1.6 TDi 4x4 500000, 5000000 1598 ccm, 77 kW, 104 PS 2012/11-2015/05
8004 ANS SKODA Octavia III Combi 1.6 TDi 500000, 5000000 1598 ccm, 66 kW, 89 PS 2012/11-2020/10
8004 ANT SKODA Octavia III 2.0 TSI RS 5000, NL3, NR3 1984 ccm, 162 kW, 220 PS 2013/05-2017/02
8004 ANU SKODA Octavia III 2.0 TDi RS 5000, NL3, NR3 1968 ccm, 135 kW, 183 PS 2013/05-2020/10
8004 ANV SKODA Octavia III Combi 2.0 TSI RS 5E5, 5E6 1984 ccm, 162 kW, 220 PS 2012/11-2017/02
8004 ANW SKODA Octavia III Combi 2.0 TDi RS 500000, 5000000 1968 ccm, 135 kW, 183 PS 2013/05-2020/10
8004 AOI SKODA Octavia III 1.6 TDi 5000, NL3, NR3 1598 ccm, 81 kW, 110 PS 2013/05-2017/02
8004 AOJ SKODA Octavia III Combi 1.6 TDi 500000, 5000000 1598 ccm, 81 kW, 110 PS 2013/05-2017/02

Assessment

media

reviews

You have to be logged in to write a review.
There are no reviews for this product.
Do you have questions about this product? eMailUs Contact us by E-MAIL Print PRINT all details for this product